mg游戏娱乐官网

  • +86-21-54306275 (Ex 801)
  • sales@ahosp.com

Hoson board error code tutorial

error codedescribeCauses and Solutions
30011Failed to load drive files1. check whether the installation procedure is complete.

2. uninstall software, reinstall

30012mg游戏娱乐官网Load function function from drive file

Interface failure

1. check whether the installation procedure is complete.

2. uninstall software, reinstall

30013Failed to extract function vector table1. check whether the installation procedure is complete.

2. uninstall software, reinstall

 

30014

 

Failed to initialize printer

1. check whether the printing equipment is powered up.

2. check whether the USB connection between the host computer and the printing device is normal.

3. check whether the printing card is normal.

30015Release driver exception1. check whether the printer is connected properly.

 

 

30016

USB communication low speed transmission status alarm1. check whether the USB connection is normal and replace the USB line.

2. check whether the computer USB interface is normal, and replace the USB interface.

3. reboot the hardware

 

30017

USB communication failed to get printer status1. check whether the printer is connected properly.

mg游戏娱乐官网2. restart the software

3. reboot the hardware

 

30018

 

Initialize printer exception

 

1. check whether the printer is connected properly.

mg游戏娱乐官网2. restart the software

3. reboot the hardware

 

30019

 

Reduction of motion abnormality

1.check whether the motor module is normal.

2.check whether the printer is connected properly.

3.restart the software

 

30020

 

Stop motion abnormality

1.check whether the motor module is normal.

2.check whether the printer is connected properly.

3.restart the software

 

30021

 

Wait for stop motion timeout.

1. check whether the motor module is normal.

2. check whether the printer is connected properly.

3. restart the software

 

30022

 

Getting the wrong location of the trolley

mg游戏娱乐官网1.check whether the printer is connected properly.

2.check whether the raster decoder is normal and replace the grating decoder.

3.check whether the grating ruler is normal and replace the grating ruler.

4.Restart software

 

30023

 

Get abnormal motion state

1.check whether the printer is connected properly.

mg游戏娱乐官网2.check whether the X axis motor is normal.

3.Restart software

 

30024

 

Start the specified mode of motion exception.

mg游戏娱乐官网1.check whether the configuration files match.

mg游戏娱乐官网2.check whether the printer is connected properly.

3.Restart software

30025In motor motion, it is impossible to execute.A movement.1. check whether there is still uncompleted motor action.

2. check whether the configuration files match.

3. check whether the printer is connected properly.

4. restart the software

 

 

30026

 

 

Setting up micro jet state error

1.check whether the configuration files match.

2.check whether the printer is connected properly, replace USB data line and computer.

3.restart the software

4.check whether the machine and the computer have been grounded. If you are grounded, please connect a PCI to USB card.

5.If you take the PCI card, you can try to buy a superior USB extension line.

 

 

30027

 

 

Getting micro jet status error

mg游戏娱乐官网1. check whether the configuration files match.

2.check whether the printer is connected properly, replace USB data line and computer.

mg游戏娱乐官网3.restart the software

mg游戏娱乐官网4.check whether the machine and the computer have been grounded. If you are grounded, please connect a PCI to USB card.

5.if you pick up the PCI card, you can try to buy a superior USB extension line.

 

 

 

30028

 

 

 

Printer thread exception error

mg游戏娱乐官网1. check whether the configuration files match.

2. check whether the printer is connected properly.

mg游戏娱乐官网3. restart the software

4. reboot the hardware

5. check whether the computer memory is more than 2G.Need 2.5G

 

 

30029

Data processing thread exception errormg游戏娱乐官网1. check whether the configuration files match.

2. check whether the printer is connected properly.

3. restart the software

4. reboot the hardware

5. check whether the computer memory is more than 2G.Need 2.5G

 

 

30029

Data processing thread exception error1. check whether the configuration files match.

mg游戏娱乐官网2. check whether the printer is connected properly.

mg游戏娱乐官网3. restart the software

4. reboot the hardware

5. check whether the computer memory is more than 2G.Need 2.5G

 

30031

 

Data interleaving error

mg游戏娱乐官网1.check whether the configuration files match.

2.restart the software

3.Restart hardware

 

30032

Copy data to nozzle buffer error

 

1.check whether the configuration files match.

2.restart the software

3.Restart hardware

 

30033

 

Movement distance exceeded range error.

1.set the movement distance a little bit.

mg游戏娱乐官网2.check whether the configuration files match.

mg游戏娱乐官网3.do you want to restart the version of software and hardware?

4.Restart hardware

 

30034

 

Initialization of printing parameter error

mg游戏娱乐官网1.check whether the INI configuration files match.

2.check whether the software settings parameters are in normal range.

3.Restart software

30035Main board optical fiber receiving abnormal1.confirm that the main board optical fiber interface has been inserted.

2.Restart hardware

30036Optical fiber receiving abnormal1. confirm that the optical interface of the spray plate has been inserted.

2.Restart hardware

30037The limit signal of the sprayed plate is triggered.1. check whether the origin limit switch connected with the spray plate is normal.

2.Restart hardware